Page 244 - Classic
P. 244
Super ‘E’ & ‘G’ 35-4571 Fits S&S Super ‘B’
35-0362
Accelo Bowls for S&S carburetors. Accelo bowl accelerator
35-9355 pump/float bowl kits improve the performance of S&S Super
B and D carburetors. Eliminates low end throttle hesitation &
35-0008 improves starting. Note: Some machining to carburetor body is
required, complete instructions included.
35-0995 VT No. Use
35-4571 Use on S&S Super ‘B’ & ‘D’ carburetors with two
S&S 1⁷⁄₈ & 2¹⁄₁₆ Super ‘G’ feature adjustable volume pump, cable throttle control. 1982-up
enrichment device for ease of starting and a throttle spool 35-0203 Pump for Above
assembly designed for late 2 cable operation. Supplied with 35-0934 Single Arm Single
tear drop air cleaner, mounting bracket and black fuel line. 35-0362 Dual Arm
Super ‘E’ carburetor is approximately 1⁷⁄₁₆” shorter than the Dual
Super ‘B’ carburetor, making installation length of the Super 35-0864 Bowl Only
‘E’ the same as stock. Can be used with 3.5 or 5.0 gallon 15-0298 Bowl Gasket
Fatbob tanks. The 1¹⁄₈” is for street stock applications, 2/16” Replacement Float fits all S&S Super B-E-G carbu-
1
for big bore and race use. Intake manifold clamps or flanges retors. For use with wire type needle and seat.
must be purchased separately when they are required. VT No. Brand
1⁷⁄₈ ‘E’ 2¹⁄₁₆ ‘G’ Fits 35-9189 VT
35-0001** — Panheads, Knuckleheads w/O-Ring Manifold 35-9183 S&S
35-0002 — Pre-78 Big Twin with O-Ring heads
35-0003 35-9201 1978-84 Big Twin with Rubber band heads
35-0013* — As Above with Notched Air Cleaner for
Five Gallon Tanks
35-0471 — Carb Only Natural Finish
35-1050 — Carb Only Black Finish
35-9355 — Rebuild Kit 35-9142 35-0290
35-0995 — Jet Kit Master Rebuild Kits. Complete carburetor restoration for
2596-13 — Screw Kit S&S Super B carburetors can be performed by using master
35-0235 — 1⁷⁄₈” Insulator rebuild kit. Float not included. Year refers to when carb was
35-0102 — 1⁷⁄₈” Intake Manifold manufactured. 1983 and earlier has forked type floats.
*Note: Does not include intake manifold & can be use on 1966-82. VT No. Year
**Note: Plumber Style Heads Require 7344-6 manifold nipples to 35-9142 1983 and earlier S&S
be installed in heads for fitment. 35-0204 1983-up V-Twin Throttle Shaft Kit
Quick Change Float Bowl 35-0290* All Years V-Twin includes shaft, spring
Screws for S&S Super models to *Note: Includes late needle and float. and stop for S&S “B”
facilitate jet changes by easy bowl series carburetors.
removal. Includes four knurled VT No. 35-0981
screws with large slots in satin Carburetor Enricher for S&S "B" carburetors.
finish. VT No. 35-0371
VT No. 37-8901 "E" Series Throttle Cable
Super E Carburetor Body Rebuild Kit. Carburetor Adapter Block
Upgrade Kit.
VT No.
VT No. 35-0850 VT No. 35-9191 36-0546
Sifton Hop-up kit for S&S "E" Carburetor
includes emulsion tube and bomb sight annular
booster tube.
35-0548 Retrofit Fuel Line Kit includes a pre- VT No. 35-0133
formed 17" x 5/16" black fuel line, needle Carburetor Spacers for S&S are available in 1”
and seat inlet assembly with 90° swivel fit- or ³⁄₈” thickness for spacing out 1⁷⁄₈” carburetors on
ting, hose clamps and a float bowl gasket. models with five gallon tanks.
Fits Custom application for S&S Super E VT No. Size
and G carburetors. VT No. 35-0548 35-0105 1”
35-0086 ³⁄₈”
14-0957 Super ‘E’ Carburetor Base, O-Ring
Support Brackets
Support Brackets
34-0336
Air Cleaner Support Brackets to fit S&S Super 31-9918 34-0336 Air Cleaner Support Brackets fit
7
‘E’ and ‘G’ on 1966-82 FL-FX. VT No. 34-0336 1 /8” S&S Super ‘B’ carburetors.
VT No. Fits
31-9918 All Adjustable type
Air Cleaner Support Bracket fits
S&S Super ‘E’ & ‘G’ 1966-82 FL-FX.
712 VT No. 34-0336
35-0362
Accelo Bowls for S&S carburetors. Accelo bowl accelerator
35-9355 pump/float bowl kits improve the performance of S&S Super
B and D carburetors. Eliminates low end throttle hesitation &
35-0008 improves starting. Note: Some machining to carburetor body is
required, complete instructions included.
35-0995 VT No. Use
35-4571 Use on S&S Super ‘B’ & ‘D’ carburetors with two
S&S 1⁷⁄₈ & 2¹⁄₁₆ Super ‘G’ feature adjustable volume pump, cable throttle control. 1982-up
enrichment device for ease of starting and a throttle spool 35-0203 Pump for Above
assembly designed for late 2 cable operation. Supplied with 35-0934 Single Arm Single
tear drop air cleaner, mounting bracket and black fuel line. 35-0362 Dual Arm
Super ‘E’ carburetor is approximately 1⁷⁄₁₆” shorter than the Dual
Super ‘B’ carburetor, making installation length of the Super 35-0864 Bowl Only
‘E’ the same as stock. Can be used with 3.5 or 5.0 gallon 15-0298 Bowl Gasket
Fatbob tanks. The 1¹⁄₈” is for street stock applications, 2/16” Replacement Float fits all S&S Super B-E-G carbu-
1
for big bore and race use. Intake manifold clamps or flanges retors. For use with wire type needle and seat.
must be purchased separately when they are required. VT No. Brand
1⁷⁄₈ ‘E’ 2¹⁄₁₆ ‘G’ Fits 35-9189 VT
35-0001** — Panheads, Knuckleheads w/O-Ring Manifold 35-9183 S&S
35-0002 — Pre-78 Big Twin with O-Ring heads
35-0003 35-9201 1978-84 Big Twin with Rubber band heads
35-0013* — As Above with Notched Air Cleaner for
Five Gallon Tanks
35-0471 — Carb Only Natural Finish
35-1050 — Carb Only Black Finish
35-9355 — Rebuild Kit 35-9142 35-0290
35-0995 — Jet Kit Master Rebuild Kits. Complete carburetor restoration for
2596-13 — Screw Kit S&S Super B carburetors can be performed by using master
35-0235 — 1⁷⁄₈” Insulator rebuild kit. Float not included. Year refers to when carb was
35-0102 — 1⁷⁄₈” Intake Manifold manufactured. 1983 and earlier has forked type floats.
*Note: Does not include intake manifold & can be use on 1966-82. VT No. Year
**Note: Plumber Style Heads Require 7344-6 manifold nipples to 35-9142 1983 and earlier S&S
be installed in heads for fitment. 35-0204 1983-up V-Twin Throttle Shaft Kit
Quick Change Float Bowl 35-0290* All Years V-Twin includes shaft, spring
Screws for S&S Super models to *Note: Includes late needle and float. and stop for S&S “B”
facilitate jet changes by easy bowl series carburetors.
removal. Includes four knurled VT No. 35-0981
screws with large slots in satin Carburetor Enricher for S&S "B" carburetors.
finish. VT No. 35-0371
VT No. 37-8901 "E" Series Throttle Cable
Super E Carburetor Body Rebuild Kit. Carburetor Adapter Block
Upgrade Kit.
VT No.
VT No. 35-0850 VT No. 35-9191 36-0546
Sifton Hop-up kit for S&S "E" Carburetor
includes emulsion tube and bomb sight annular
booster tube.
35-0548 Retrofit Fuel Line Kit includes a pre- VT No. 35-0133
formed 17" x 5/16" black fuel line, needle Carburetor Spacers for S&S are available in 1”
and seat inlet assembly with 90° swivel fit- or ³⁄₈” thickness for spacing out 1⁷⁄₈” carburetors on
ting, hose clamps and a float bowl gasket. models with five gallon tanks.
Fits Custom application for S&S Super E VT No. Size
and G carburetors. VT No. 35-0548 35-0105 1”
35-0086 ³⁄₈”
14-0957 Super ‘E’ Carburetor Base, O-Ring
Support Brackets
Support Brackets
34-0336
Air Cleaner Support Brackets to fit S&S Super 31-9918 34-0336 Air Cleaner Support Brackets fit
7
‘E’ and ‘G’ on 1966-82 FL-FX. VT No. 34-0336 1 /8” S&S Super ‘B’ carburetors.
VT No. Fits
31-9918 All Adjustable type
Air Cleaner Support Bracket fits
S&S Super ‘E’ & ‘G’ 1966-82 FL-FX.
712 VT No. 34-0336
