Page 334 - Classic
P. 334
45” Fender
Note: All Items Shipped with a Raw Finish may have some
oxidation (rust on surface)!
50-0144 50-0778
50-0771 50-0772
45” Military Fenders are skirtless Army style of 1940’s for 45” Solo
models with Spring Forks 1937-52.
VT No. OEM Type
50-0771 3710-41A Rear
50-0772 3702-41 Front
50-0454 50-0750
50-0141 50-0179 31-1342
50-0523
Spring Fork Front Fenders are 7½” wide for 16” or 18” wheels
50-1053 with riveted on wide braces. The 45” type fits with rockers inside
the fork. Big Twin fits with outside rockers.
VT No. Year/Model
50-0144 1936-48 Big Twin
50-0750 1936-46 Big Twin
50-0778 1936-52 45”
50-1159 50-0454 1936-52 45”
45” Solo Fender. 50-0523 1949-52 45”
VT No. Item 50-0643 1934-35 VL
50-0141 1936-52 with Narrow Braces 50-0463 1934-35 DL
50-0179 1936-52 with Narrow Braces 31-1342 1930-35 Brace
50-0168 1936-52 Skirt Set Only 50-1595 1926-29 JD, Note: Body without brackets
50-1053 1949-57 only Early Mud Flap replaces 59235-26 in
50-1159 1936-52 Bobbed
50-0771 Army Rear Rigid Rear Fender rubber with laminated cloth construction.
50-0931 Hinge and Pin Mounting Kit includes 28-2249 VT No. Item
37-8840 Pin hardware to install rear 28-2249 Mud Flap
50-0557 Rear Brace V fender on 1929-52 45’s. 49-0425 Mount Hardware
50-1207 Fender Pieces 45 Solo Finish
31-1017 Fender Clip (2) 50-0168 9791-15 Cadmium
9790-15 Chrome
51-0865 Rear Brace 9792-15 Parkerized
50-0914 Stainless Fender Trim for 1939-48
Big Twin and 45”, 1940-49 Spring
fork front Includes clips.
VT No. Fits
50-0914 Front 45 WL Raw Tank for 45 models includes the threaded cap.
37-8458 Clips, 25 pack Steel oil tank features a raw oiled finish. Tank accepts rubber hose
and fittings for installation. In order to install the oil tank on 1936-52
37-6368 37-6369 37-6370 WL models, the battery box mount tab must be removed first. Fastens
to seat post tube and frame fender mount. Tanks also uses Big Twin
screw in cap without the dip stick. Tank features cut out on the left side
for spark coil and threaded inserts for the feed, vent, return and drain.
Replacement Fender Rivets fit all FL front and rear fenders The right side features the side fill. The left side has 2 studs to mount
the ignition coil, no need to remove original battery box mount! Oil tank
and FX front fenders, pack of 25. clamps to center position on 45 W and G models by mounting to clutch
VT No. Fits cable bracket and the rear fender mount. Tank will accept a 12 Volt bat-
37-6368 Big Twin Fender Brace tery, battery box tab must be removed for installation. Tank has 1/8”NPT
37-6369 Big Twin Fender Top female fittings to accept rubber lines. Installation of original steel type
37-6370 FX Front, 1973-up Stainless oil lines requires fabrication to custom specifications. Order connector
Front Fender Brace Tab Set attaches the lower fender brace to the fittings separate.
fender for added support and features a raw finish. VT No. Finish
Installed by spot welding. VT No. 31-1541 40-0964 Raw
40-1006 Chrome
802
Note: All Items Shipped with a Raw Finish may have some
oxidation (rust on surface)!
50-0144 50-0778
50-0771 50-0772
45” Military Fenders are skirtless Army style of 1940’s for 45” Solo
models with Spring Forks 1937-52.
VT No. OEM Type
50-0771 3710-41A Rear
50-0772 3702-41 Front
50-0454 50-0750
50-0141 50-0179 31-1342
50-0523
Spring Fork Front Fenders are 7½” wide for 16” or 18” wheels
50-1053 with riveted on wide braces. The 45” type fits with rockers inside
the fork. Big Twin fits with outside rockers.
VT No. Year/Model
50-0144 1936-48 Big Twin
50-0750 1936-46 Big Twin
50-0778 1936-52 45”
50-1159 50-0454 1936-52 45”
45” Solo Fender. 50-0523 1949-52 45”
VT No. Item 50-0643 1934-35 VL
50-0141 1936-52 with Narrow Braces 50-0463 1934-35 DL
50-0179 1936-52 with Narrow Braces 31-1342 1930-35 Brace
50-0168 1936-52 Skirt Set Only 50-1595 1926-29 JD, Note: Body without brackets
50-1053 1949-57 only Early Mud Flap replaces 59235-26 in
50-1159 1936-52 Bobbed
50-0771 Army Rear Rigid Rear Fender rubber with laminated cloth construction.
50-0931 Hinge and Pin Mounting Kit includes 28-2249 VT No. Item
37-8840 Pin hardware to install rear 28-2249 Mud Flap
50-0557 Rear Brace V fender on 1929-52 45’s. 49-0425 Mount Hardware
50-1207 Fender Pieces 45 Solo Finish
31-1017 Fender Clip (2) 50-0168 9791-15 Cadmium
9790-15 Chrome
51-0865 Rear Brace 9792-15 Parkerized
50-0914 Stainless Fender Trim for 1939-48
Big Twin and 45”, 1940-49 Spring
fork front Includes clips.
VT No. Fits
50-0914 Front 45 WL Raw Tank for 45 models includes the threaded cap.
37-8458 Clips, 25 pack Steel oil tank features a raw oiled finish. Tank accepts rubber hose
and fittings for installation. In order to install the oil tank on 1936-52
37-6368 37-6369 37-6370 WL models, the battery box mount tab must be removed first. Fastens
to seat post tube and frame fender mount. Tanks also uses Big Twin
screw in cap without the dip stick. Tank features cut out on the left side
for spark coil and threaded inserts for the feed, vent, return and drain.
Replacement Fender Rivets fit all FL front and rear fenders The right side features the side fill. The left side has 2 studs to mount
the ignition coil, no need to remove original battery box mount! Oil tank
and FX front fenders, pack of 25. clamps to center position on 45 W and G models by mounting to clutch
VT No. Fits cable bracket and the rear fender mount. Tank will accept a 12 Volt bat-
37-6368 Big Twin Fender Brace tery, battery box tab must be removed for installation. Tank has 1/8”NPT
37-6369 Big Twin Fender Top female fittings to accept rubber lines. Installation of original steel type
37-6370 FX Front, 1973-up Stainless oil lines requires fabrication to custom specifications. Order connector
Front Fender Brace Tab Set attaches the lower fender brace to the fittings separate.
fender for added support and features a raw finish. VT No. Finish
Installed by spot welding. VT No. 31-1541 40-0964 Raw
40-1006 Chrome
802
