Page 93 - Classic
P. 93
Alternator Cover Set includes pol- Belt Drive
ished outer housing and chrome
rotor cover.
VT No. 20-0337 20-0331
Installed
20-0220 20-0330
Polished Alternator Cover for Big Twins is for use on all Cone
Belt Shroud and Side Guard Kit is for alternator Big Twins motors. Designed to protect your alternator, also helps cooling
with 1¹⁄₂”, 2” or 3” open belt drives. The kit includes chrome belt by acting as a heat sink. It has a mounting lug for belt shroud
shroud. built in. VT No. 20-0330
VT No. Item Fits
20-0222 Belt Shroud Generator Big Twin with 3” Drive Chrome Big Twin
20-0220 Belt Shroud Generator Big Twin with 1¹⁄₂” or 2” Drive Alternator Rotor
27-1729 Cover presses
over 1981-up
rotors for tight fit.
VT No. 20-0216
Frame Mount Kickstand Stop for use on all open belt drive
Big Twin by clamping to frame tube. Fits 1 ³⁄₈” and must be cut Outside Belt Chrome Alternator CLASSIC
to desired length. VT No. 27-1729 Guide Plate is Rotor Cover fits major
Chrome Pike Motor Nut fits 1955-up for all Primo 8, 11 brand belt drive and open
Big Twin sprocket shaft. and 14 mm front primary set ups. Installs to
VT No. 37-0890 pulleys except completely cover the steel
taper shaft. alternator rotor.
Acorn Engine Nuts for all Big Twins. VT No. 20-0230 VT No. 20-0238
VT No. Year
7107-1 1936-54 17-0945 Sprocket Nut and Lock Tab Set for 1955-
7816-1 1955-76 up Big Twin allows locking of nut by utiliz-
20-0307 ing two tabs which fit into sprocket holes
when non-compensator sprocket is used.
VT No. Item
17-0945 Kit
12-0504 Nut Only
Nerf Bar is constructed of 1” chrome
bar, bolts to left side for primary protec-
Equalizer Engine Plate designed for open primary on all tion. Fits 1958-84 FL.
1970-up cone motors, connects engine and transmission for a VT No. 20-0305
rigid unit, when eliminating the inner primary. Alternator cover,
engine plate, idler assembly and bearing support sold sepa- 20-0556
rately. This plate is without the idler slot. Front
VT No. 20-0307
Primo Replacement Pulley
VT No. Primo# Year Type Belt
Primo 8mm Front Pulleys 74 and 80 HD
20-0555 P-39-T 1937-54 Tapered Shaft 1¹⁄₂” Belt (Use with Adjustable Transmissions)
20-0556 P-39-S 1955-64 Splined Shaft 1¹⁄₂” Belt (Use with Adjustable Transmissions)
20-0558 P-41-S 1965-84 Splined Shaft 1¹⁄₂” Belt
20-0561 P-47-T-3 1937-54 Tapered Shaft 3” Belt (Open Installation)
Primo 8mm Rear Pulleys 74 and 80 HD
20-0567 P-61-E 1965-84 Rear Pulley 1¹⁄₂” Belt (Electric Starter, Closed Primary, 4-Speed)
561
ished outer housing and chrome
rotor cover.
VT No. 20-0337 20-0331
Installed
20-0220 20-0330
Polished Alternator Cover for Big Twins is for use on all Cone
Belt Shroud and Side Guard Kit is for alternator Big Twins motors. Designed to protect your alternator, also helps cooling
with 1¹⁄₂”, 2” or 3” open belt drives. The kit includes chrome belt by acting as a heat sink. It has a mounting lug for belt shroud
shroud. built in. VT No. 20-0330
VT No. Item Fits
20-0222 Belt Shroud Generator Big Twin with 3” Drive Chrome Big Twin
20-0220 Belt Shroud Generator Big Twin with 1¹⁄₂” or 2” Drive Alternator Rotor
27-1729 Cover presses
over 1981-up
rotors for tight fit.
VT No. 20-0216
Frame Mount Kickstand Stop for use on all open belt drive
Big Twin by clamping to frame tube. Fits 1 ³⁄₈” and must be cut Outside Belt Chrome Alternator CLASSIC
to desired length. VT No. 27-1729 Guide Plate is Rotor Cover fits major
Chrome Pike Motor Nut fits 1955-up for all Primo 8, 11 brand belt drive and open
Big Twin sprocket shaft. and 14 mm front primary set ups. Installs to
VT No. 37-0890 pulleys except completely cover the steel
taper shaft. alternator rotor.
Acorn Engine Nuts for all Big Twins. VT No. 20-0230 VT No. 20-0238
VT No. Year
7107-1 1936-54 17-0945 Sprocket Nut and Lock Tab Set for 1955-
7816-1 1955-76 up Big Twin allows locking of nut by utiliz-
20-0307 ing two tabs which fit into sprocket holes
when non-compensator sprocket is used.
VT No. Item
17-0945 Kit
12-0504 Nut Only
Nerf Bar is constructed of 1” chrome
bar, bolts to left side for primary protec-
Equalizer Engine Plate designed for open primary on all tion. Fits 1958-84 FL.
1970-up cone motors, connects engine and transmission for a VT No. 20-0305
rigid unit, when eliminating the inner primary. Alternator cover,
engine plate, idler assembly and bearing support sold sepa- 20-0556
rately. This plate is without the idler slot. Front
VT No. 20-0307
Primo Replacement Pulley
VT No. Primo# Year Type Belt
Primo 8mm Front Pulleys 74 and 80 HD
20-0555 P-39-T 1937-54 Tapered Shaft 1¹⁄₂” Belt (Use with Adjustable Transmissions)
20-0556 P-39-S 1955-64 Splined Shaft 1¹⁄₂” Belt (Use with Adjustable Transmissions)
20-0558 P-41-S 1965-84 Splined Shaft 1¹⁄₂” Belt
20-0561 P-47-T-3 1937-54 Tapered Shaft 3” Belt (Open Installation)
Primo 8mm Rear Pulleys 74 and 80 HD
20-0567 P-61-E 1965-84 Rear Pulley 1¹⁄₂” Belt (Electric Starter, Closed Primary, 4-Speed)
561
