Page 211 - Mult
P. 211
Retro Rigid
51-1948
51-1957 51-1948
Replica Retro Rigid Frame features original style
200 51-1957 51-0096 construction including forged parts in neck, side car
mounts and rear axle areas. Order rear mount for
TC-88 models separately. This retro rigid frame can
be fitted with a Panhead or Shovelhead engine with
a 4-Speed transmission. A tin inner primary 42-0617
must be utilized for this application. Use of a ¹⁄₂” offset
transmission mount plate and ¹⁄₂” offset motor sprock-
et with splines will offer clearance to use a 200 or 140
rear tire with a chain rear drive. Additional clearance
can be achieved with the addition of a ¹⁄₄” offset trans-
mission sprocket.
Tire Style Type *Note: For Evolution/TC/Shovelhead/Panhead
200 Straight 51-1957 Disc engines.
200 Rigid Wishbone 51-1948 Disc Frame will accept:
140 Straight 51-0096 Mechanical • Flatside tanks • 31-0859 oil tank bracket
140 Wishbone 51-0097 Mechanical • Softail oil tank
Related Components • 230 rear tire with chain • 44-1942 axle
VT No. Item Note • 51-0625 TC-88/Evolution rear
17-0945 Engine Sprocket Nut Kit • 200 rear tire with belt engine mount adapter
19-0399 Transmission Sprocket Only 22T • +2” raised neck
19-0447 Transmission Sprocket Kit 23T • 44-1946 axle collars
19-0448 Transmission Sprocket Kit 24T • Stock rake, 30°
300 RSD Frame • Order related parts separately.
Order related components separately.
51-3501
44-0393 Rear Axle
51-3502 VT No. Item
20-0478 133T Belt (1.5”)
20-0586 133T Belt (1.125”)
19-0564 Alternator Flange Offset Plate
40-0476 Chrome Oil Tank
51-1004
300 Right Side Drive Chopper Frame by Wyatt Gatling fea-
tures full rigid styling with double tube motor carriage. Frame MULTI FIT/CHOPPER MULTI FIT/CHOPPER
will accept round oil tank and up to 4” extended gas tank. Neck Frames include a one piece billet front mount which
bolts in.
is drilled for internal stop kit. Motor and transmission are in the Single Tube Chopper Frame features full rigid styling by
stock position an no offset is required when using the right side Wyatt Gatling. Frame will accept round oil tank, and up to 4”
drive transmission. 1” axle included. Features 1³⁄₈” tubing with stretch gas tanks. Neck is drilled for internal stop kit. Frame
1¹⁄₂” backbone and 4” stretch in backbone and 6” in downtubes. has built in ³⁄₄” offset to accommodate the 200 tire. Order inner
VT No. 51-3502 17-0455 Transmission
Recommended Parts List. 27-1729 Kickstand Stop primary or motor spacer plate with ³⁄₄” offset. Frame details
VT No. Type 27-1785 Weld On Kickstand include: 1³⁄₈ tubing, billet rear axle plates, billet front motor
20-0586 Belt 1.125” 133T mount, accepts 200 series tires w/1.5” belt, 4” stretch in down-
44-0669 Adjuster, 2 piece
44-0676 Axle (300) tubes, 38° rake, 2” stretch (backbone). Axle included.
52-0682 Wheel (or 52-0684) (300) VT No. 51-3501
Wyatt Gatling Wide Wrap Around
Oil Tank are 14” wide for custom
wide rigid. Available raw finish.
Feature top Iso mount design.
Mounting hardware included.
VT No. 40-0677
1221
51-1948
51-1957 51-1948
Replica Retro Rigid Frame features original style
200 51-1957 51-0096 construction including forged parts in neck, side car
mounts and rear axle areas. Order rear mount for
TC-88 models separately. This retro rigid frame can
be fitted with a Panhead or Shovelhead engine with
a 4-Speed transmission. A tin inner primary 42-0617
must be utilized for this application. Use of a ¹⁄₂” offset
transmission mount plate and ¹⁄₂” offset motor sprock-
et with splines will offer clearance to use a 200 or 140
rear tire with a chain rear drive. Additional clearance
can be achieved with the addition of a ¹⁄₄” offset trans-
mission sprocket.
Tire Style Type *Note: For Evolution/TC/Shovelhead/Panhead
200 Straight 51-1957 Disc engines.
200 Rigid Wishbone 51-1948 Disc Frame will accept:
140 Straight 51-0096 Mechanical • Flatside tanks • 31-0859 oil tank bracket
140 Wishbone 51-0097 Mechanical • Softail oil tank
Related Components • 230 rear tire with chain • 44-1942 axle
VT No. Item Note • 51-0625 TC-88/Evolution rear
17-0945 Engine Sprocket Nut Kit • 200 rear tire with belt engine mount adapter
19-0399 Transmission Sprocket Only 22T • +2” raised neck
19-0447 Transmission Sprocket Kit 23T • 44-1946 axle collars
19-0448 Transmission Sprocket Kit 24T • Stock rake, 30°
300 RSD Frame • Order related parts separately.
Order related components separately.
51-3501
44-0393 Rear Axle
51-3502 VT No. Item
20-0478 133T Belt (1.5”)
20-0586 133T Belt (1.125”)
19-0564 Alternator Flange Offset Plate
40-0476 Chrome Oil Tank
51-1004
300 Right Side Drive Chopper Frame by Wyatt Gatling fea-
tures full rigid styling with double tube motor carriage. Frame MULTI FIT/CHOPPER MULTI FIT/CHOPPER
will accept round oil tank and up to 4” extended gas tank. Neck Frames include a one piece billet front mount which
bolts in.
is drilled for internal stop kit. Motor and transmission are in the Single Tube Chopper Frame features full rigid styling by
stock position an no offset is required when using the right side Wyatt Gatling. Frame will accept round oil tank, and up to 4”
drive transmission. 1” axle included. Features 1³⁄₈” tubing with stretch gas tanks. Neck is drilled for internal stop kit. Frame
1¹⁄₂” backbone and 4” stretch in backbone and 6” in downtubes. has built in ³⁄₄” offset to accommodate the 200 tire. Order inner
VT No. 51-3502 17-0455 Transmission
Recommended Parts List. 27-1729 Kickstand Stop primary or motor spacer plate with ³⁄₄” offset. Frame details
VT No. Type 27-1785 Weld On Kickstand include: 1³⁄₈ tubing, billet rear axle plates, billet front motor
20-0586 Belt 1.125” 133T mount, accepts 200 series tires w/1.5” belt, 4” stretch in down-
44-0669 Adjuster, 2 piece
44-0676 Axle (300) tubes, 38° rake, 2” stretch (backbone). Axle included.
52-0682 Wheel (or 52-0684) (300) VT No. 51-3501
Wyatt Gatling Wide Wrap Around
Oil Tank are 14” wide for custom
wide rigid. Available raw finish.
Feature top Iso mount design.
Mounting hardware included.
VT No. 40-0677
1221
