Page 37 - Tools
P. 37
FXSTS Fork Stem Bearing
End Play Setup Wrench. Fork
Offset Handle allows for
proper clearance of fuel tank
and other accessories.
VT No. 16-0444
Lower Neck Bearing
Puller Set includes cross
arm puller, rods and lower 16-0895
puller claw. Simply remove
roller from old bearing,
install claw and turn puller.
VT No. 16-0073 16-1768
Fork Tube Plug Tool has a special socket which fits
Fork Bearing Installer Tool fits over 1” 16-1766 1948-up Glide Fork Plug, 1/2” drive.
stem allowing bearing to be “driven” on. VT No. Brand
VT No. 16-0724 16-0630 V-Twin
16-1008 Jims
Fork Spring Compressor Tool
16-0065 puts pressure on top fork plug
Steering Head Bearing Tools fit 1988-up FXST, to compress spring to ease in
1982-up XL, 1992-up FXDB-FLT to remove or install assembly.
races. VT No. Type
VT No. Item 16-1009 Jims
16-1768 Remover 16-1025* Jims
16-1766 Installer *Note: Use with 16-1009 for
16-1196 Installer 2014-up FLT extended length fork tubes.
Hex Top Fork Nut Socket has ³⁄₈” drive, rubber pro- 16-0065 Driver Handle for A 16-1009
Driver Handle Adapter, 1992-up FLT-FXD
16-0895
tector on inside for Glide Forks, 35mm. By Jims. Fork Cap Wrench.
VT No. 16-0670 Fork Stem Nut Wrench fits VT No. 16-1034
Socket Wrench is designed for FLT.
easy removal and installation of VT No. 16-1977
stock 1³⁄₈ hex flat top fork tube
plugs. Installed O-Ring eliminates Fork Pre-Load Assembly Duo-Glide Nut Double
damage to top of plug. Black oxide. Tool allows pre-load to be Ended Wrench used for
VT No. 2317-1 set on 41mm forks during removing and installing
assembly. crenulated nuts and
VT No 16-1197 dust covers with internal
thread.
Jims Fork Cap Installation VT No. 16-1344
Tool allows the installation
of the fork tube caps on the
Fork Tube Spring Retainers and Pin Wrench Kit motorcycle without removing
includes 2 retainers for 1952-72 XL and pin wrench other parts. VT No 16-1198
for installation removal of retainers.
VT No. 7700-3
Jims Ignition Switch and
Fork Lock Tool used to
make installing or removing Jims Castlenut Socket is for use with FXST inverted
the ignition switch and fork forks. The 2017-up Softail models requires the fork
lock a easy process. nut (Castlenut) to secure and compress the fork
VT No. 16-1179 spring. This one piece solid steel socket is designed
to secure the joint rod prior to final assembly.
VT No. 16-1061
Fork Seal Drivers
Fork Seal Installer. Installs bushing and seal with- 49mm Fork Seal and Dust Shield
out damaging components. Installer Tool installs the lower leg
VT No. OEM Use 49mm fork seal squarely into the bore
16-0055 34190 1983-87 FXRT 1983-87 XR with no damage to the lip seal sur-
1984-87 FX-XL face. Also installs dust shield cover.
16-0056 34634 1984-13 FLT-FXWG It is a two-price design to aid in some
16-0055 16-0056 16-0964 16-0964 36583 1987-up FXR-FXRS, 88-up XL assembly applications.
VT No. 16-1369
Adjustable Split Fork Seal
Driver Set use on all 35mm, 16-0191
39mm and 41mm forks.
Includes seal drive and three
seal guides.
VT No. 16-0074
16-0191
49 mm Fork Seal and Dust Shield Installer Tool
installs the lower leg 49mm fork seal squarely into the
bore with no damage to the lip seal surface. Provides
accurate alignment fr seal replacement, factory style TOOLS
tool.
VT No. 16-0191
1295
End Play Setup Wrench. Fork
Offset Handle allows for
proper clearance of fuel tank
and other accessories.
VT No. 16-0444
Lower Neck Bearing
Puller Set includes cross
arm puller, rods and lower 16-0895
puller claw. Simply remove
roller from old bearing,
install claw and turn puller.
VT No. 16-0073 16-1768
Fork Tube Plug Tool has a special socket which fits
Fork Bearing Installer Tool fits over 1” 16-1766 1948-up Glide Fork Plug, 1/2” drive.
stem allowing bearing to be “driven” on. VT No. Brand
VT No. 16-0724 16-0630 V-Twin
16-1008 Jims
Fork Spring Compressor Tool
16-0065 puts pressure on top fork plug
Steering Head Bearing Tools fit 1988-up FXST, to compress spring to ease in
1982-up XL, 1992-up FXDB-FLT to remove or install assembly.
races. VT No. Type
VT No. Item 16-1009 Jims
16-1768 Remover 16-1025* Jims
16-1766 Installer *Note: Use with 16-1009 for
16-1196 Installer 2014-up FLT extended length fork tubes.
Hex Top Fork Nut Socket has ³⁄₈” drive, rubber pro- 16-0065 Driver Handle for A 16-1009
Driver Handle Adapter, 1992-up FLT-FXD
16-0895
tector on inside for Glide Forks, 35mm. By Jims. Fork Cap Wrench.
VT No. 16-0670 Fork Stem Nut Wrench fits VT No. 16-1034
Socket Wrench is designed for FLT.
easy removal and installation of VT No. 16-1977
stock 1³⁄₈ hex flat top fork tube
plugs. Installed O-Ring eliminates Fork Pre-Load Assembly Duo-Glide Nut Double
damage to top of plug. Black oxide. Tool allows pre-load to be Ended Wrench used for
VT No. 2317-1 set on 41mm forks during removing and installing
assembly. crenulated nuts and
VT No 16-1197 dust covers with internal
thread.
Jims Fork Cap Installation VT No. 16-1344
Tool allows the installation
of the fork tube caps on the
Fork Tube Spring Retainers and Pin Wrench Kit motorcycle without removing
includes 2 retainers for 1952-72 XL and pin wrench other parts. VT No 16-1198
for installation removal of retainers.
VT No. 7700-3
Jims Ignition Switch and
Fork Lock Tool used to
make installing or removing Jims Castlenut Socket is for use with FXST inverted
the ignition switch and fork forks. The 2017-up Softail models requires the fork
lock a easy process. nut (Castlenut) to secure and compress the fork
VT No. 16-1179 spring. This one piece solid steel socket is designed
to secure the joint rod prior to final assembly.
VT No. 16-1061
Fork Seal Drivers
Fork Seal Installer. Installs bushing and seal with- 49mm Fork Seal and Dust Shield
out damaging components. Installer Tool installs the lower leg
VT No. OEM Use 49mm fork seal squarely into the bore
16-0055 34190 1983-87 FXRT 1983-87 XR with no damage to the lip seal sur-
1984-87 FX-XL face. Also installs dust shield cover.
16-0056 34634 1984-13 FLT-FXWG It is a two-price design to aid in some
16-0055 16-0056 16-0964 16-0964 36583 1987-up FXR-FXRS, 88-up XL assembly applications.
VT No. 16-1369
Adjustable Split Fork Seal
Driver Set use on all 35mm, 16-0191
39mm and 41mm forks.
Includes seal drive and three
seal guides.
VT No. 16-0074
16-0191
49 mm Fork Seal and Dust Shield Installer Tool
installs the lower leg 49mm fork seal squarely into the
bore with no damage to the lip seal surface. Provides
accurate alignment fr seal replacement, factory style TOOLS
tool.
VT No. 16-0191
1295
