Page 23 - Tools
P. 23
Cam Tool
16-1384 16-1390 Jims Cam Locking Tool allows
removal and torquing of cam
sprocket bolts by locking camshaft
and crankshaft sprockets. Use on
2006-17 Dynaglide and 2007-16
FXST-FLT models.
VT No. 16-1352
Twin Cam Inner Cam Bearing Tool. This tool will
safely install the inner cam bearing in all 1999-06
FXST-FLST and Dynaglide models. Installs bearings 16-1279
to the proper depth in case without damaging bear- 16-1351
ings.
VT No. Brand
16-1384 Jims Cam Tensioner Removal and Installation Tool to
16-1390 V-Twin remove and replace the spring loaded cam chain ten-
sioners. Fits 2000-06 FXST, FLST and 1999-06 FLT.
Jims Cam Gear Remover VT No. 16-0188
and Alignment Tools. The Jims Cam Chain Tensioner
alignment tool is designed to Unloader will hold the tension
index the cam gears position of the primary cam chain on
while removing on installing the Twin Cam model engine.
16-1282 the cam gear. This tool Instruction included.
will allow you to accurately
VT No. 16-0793
position and or reposition the cam gear from one
camshaft to another, as well as allowing you to retard 16-1271 16-1840 16-0793
or advance the gear position by up to 10 degrees with
the accuracy of a ¹⁄₄ degree. The cam gear remover Inner Cam Bearing Remover Tool allows removal 16-0792
tool is use to remove the cam gear from the camshaft. of needle bearing and will also keep needles and
This tool acts as stable base to keep the camshaft rollers from falling into engine.
perpendicular to the press. Use on all 1970-98 BT. VT No Jims Year
VT No. Item 16-1271 16-1821 1958-98 Big Twin
16-1282 Alignment Tool 16-1392 16-1840 1957-90 XL Jims Camshaft Remover and Installer Tool allows
16-1283 Remover Tool 16-0190 16-1279 1999-06 FXST, FLST removal and installation of cams in the Twin Cam
1999-05 FXD, FLT model engine. Tool is used in conjunction with VT
16-1391 16-1351 2006-17 FXST, FLST, FXD No. 16-0793 cam chain tensioner unloader.
2006-16 FLT VT No. 16-0792
Jims Twin Cam
16-0790 Bearing Puller used
Jims Camshaft/Crankshaft to remove bearing
from camshaft, this
Locking Tool will lock the
gear teeth on the Twin Cam 16-1280 tool is designed to
remove the bearing
model engine. Instructions straight with no slip-
included. Jims Crankshaft Bushing Remover/Installer will ping or binding. Use
VT No. 16-0790 facilitate removal and installation of bushing in cam on all Twin Cam.
support plate on TC-88 model engines. VT No. 16-1280
VT No. 16-0791
Oil Pump
Sifton Oil Pump Check Ball Oil Pump Snap Ring Installer 16-0875 Tappet Oil Screen
Reseater will recut the seat to allow makes it easy to install outer 16-0665 Plug Tool. Wide
the ball to sit properly to prevent snap ring on oil pump shaft, slot type to remove
sumping for Big Twin and XL alumi- without stretching the ring. Just stock slotted plug
num and cast iron pumps. apply oil to ring expander, holder without removing
VT No. 16-0519 up to the big end of ring expand- exhaust pipes.
16-9723 er, hold up to the end of the shaft, then push ring onto VT No. Brand
the shaft with sleeve. Use on Big Twin oil pumps. 16-0875 V-Twin
VT No. 16-0889 16-0665 Jims
Oil Pump Drill Fixture
16-9724 allows drilling of cases to Oil Pump Drill Jig
accept late model stock or replaces 94461-81
S&S oil pumps. for installation of
Oil Pressure Sending Unit Wrenches. These VT No. 16-0986 factory type updat-
ed pump VT No.
reversible ratcheting wrenches are used to install and 12-9900 on 1973-
remove oil pressure indicator lamp or gauge sending 78 crank cases.
unit on all FL Touring models 1999-up. VT No. 16-1843
VT No. Year
16-9723 1999-up
16-9724 1984-98
Ball Burnish Tool will
facilitate ball burnishing of
the relief valve seat on cast
iron pumps.
VT No. 16-1033 TOOLS
1281
16-1384 16-1390 Jims Cam Locking Tool allows
removal and torquing of cam
sprocket bolts by locking camshaft
and crankshaft sprockets. Use on
2006-17 Dynaglide and 2007-16
FXST-FLT models.
VT No. 16-1352
Twin Cam Inner Cam Bearing Tool. This tool will
safely install the inner cam bearing in all 1999-06
FXST-FLST and Dynaglide models. Installs bearings 16-1279
to the proper depth in case without damaging bear- 16-1351
ings.
VT No. Brand
16-1384 Jims Cam Tensioner Removal and Installation Tool to
16-1390 V-Twin remove and replace the spring loaded cam chain ten-
sioners. Fits 2000-06 FXST, FLST and 1999-06 FLT.
Jims Cam Gear Remover VT No. 16-0188
and Alignment Tools. The Jims Cam Chain Tensioner
alignment tool is designed to Unloader will hold the tension
index the cam gears position of the primary cam chain on
while removing on installing the Twin Cam model engine.
16-1282 the cam gear. This tool Instruction included.
will allow you to accurately
VT No. 16-0793
position and or reposition the cam gear from one
camshaft to another, as well as allowing you to retard 16-1271 16-1840 16-0793
or advance the gear position by up to 10 degrees with
the accuracy of a ¹⁄₄ degree. The cam gear remover Inner Cam Bearing Remover Tool allows removal 16-0792
tool is use to remove the cam gear from the camshaft. of needle bearing and will also keep needles and
This tool acts as stable base to keep the camshaft rollers from falling into engine.
perpendicular to the press. Use on all 1970-98 BT. VT No Jims Year
VT No. Item 16-1271 16-1821 1958-98 Big Twin
16-1282 Alignment Tool 16-1392 16-1840 1957-90 XL Jims Camshaft Remover and Installer Tool allows
16-1283 Remover Tool 16-0190 16-1279 1999-06 FXST, FLST removal and installation of cams in the Twin Cam
1999-05 FXD, FLT model engine. Tool is used in conjunction with VT
16-1391 16-1351 2006-17 FXST, FLST, FXD No. 16-0793 cam chain tensioner unloader.
2006-16 FLT VT No. 16-0792
Jims Twin Cam
16-0790 Bearing Puller used
Jims Camshaft/Crankshaft to remove bearing
from camshaft, this
Locking Tool will lock the
gear teeth on the Twin Cam 16-1280 tool is designed to
remove the bearing
model engine. Instructions straight with no slip-
included. Jims Crankshaft Bushing Remover/Installer will ping or binding. Use
VT No. 16-0790 facilitate removal and installation of bushing in cam on all Twin Cam.
support plate on TC-88 model engines. VT No. 16-1280
VT No. 16-0791
Oil Pump
Sifton Oil Pump Check Ball Oil Pump Snap Ring Installer 16-0875 Tappet Oil Screen
Reseater will recut the seat to allow makes it easy to install outer 16-0665 Plug Tool. Wide
the ball to sit properly to prevent snap ring on oil pump shaft, slot type to remove
sumping for Big Twin and XL alumi- without stretching the ring. Just stock slotted plug
num and cast iron pumps. apply oil to ring expander, holder without removing
VT No. 16-0519 up to the big end of ring expand- exhaust pipes.
16-9723 er, hold up to the end of the shaft, then push ring onto VT No. Brand
the shaft with sleeve. Use on Big Twin oil pumps. 16-0875 V-Twin
VT No. 16-0889 16-0665 Jims
Oil Pump Drill Fixture
16-9724 allows drilling of cases to Oil Pump Drill Jig
accept late model stock or replaces 94461-81
S&S oil pumps. for installation of
Oil Pressure Sending Unit Wrenches. These VT No. 16-0986 factory type updat-
ed pump VT No.
reversible ratcheting wrenches are used to install and 12-9900 on 1973-
remove oil pressure indicator lamp or gauge sending 78 crank cases.
unit on all FL Touring models 1999-up. VT No. 16-1843
VT No. Year
16-9723 1999-up
16-9724 1984-98
Ball Burnish Tool will
facilitate ball burnishing of
the relief valve seat on cast
iron pumps.
VT No. 16-1033 TOOLS
1281
