Page 26 - Tools
P. 26
Cylinder Head
Jims Compression
Release Valve Tool
use this tool for
machining all Twin
Cam heads 1999-17 for Head Holder Tool by Pingel has 12 and 14mm ends
®
compression releases. to hold head through spark plug hole, by support in a
Installs on front or rear vise. VT No. 16-1842
head, with or without Exhaust Pipe Retaining
valves installed. Order 16-1884 Ring Tool fits 1984-up
threaded tap tool and FXST, FLT,1986-up FLST,
compression releases separately. XL.
VT No. Item VT No. Brand
16-1169 Compression Release Tool 16-1675 VT
16-1170 Threaded Tapping Tool 16-1884 Jims
16-1171 Compression Release Valve, pair
60-0132 Machine Head and Install Release Valves
Cylinder Head Support
Stand fits Evo, Shovelhead
and Ironhead Sportsters.
Adapters are to be used Clone Speed
with a bar press and the Wrench allows
stand included to push removal of head bolts
guides in and out in a on 1936-84 Overhead
straight line. Set includes Head Bolt Torque Gauge for all Evolutions. This Valve models, after
stand and 6 adapters. gauge allows the measuring of 90° when tightening they are broken loose
VT No. 16-0651 Evolution head bolts. Torquing sequence lasered on with wrench.
Jims Rocker Box gauge. Use on all 1984-98 Evolution models. VT No. 16-0953
VT No. 16-0679
Alignment Tool Set. Fits
1999-17 FXST, FLST, Cast Fin for Repair cut to fit and weld
FLT, FXD in!
VT No. 16-1882 VT No. 11-1710
Jims Exhaust Gasket Installer
Tool will correctly install exhaust
port gaskets into cylinder heads,
Jims M-8 Cylinder Head Holder is two sided, one minimizes gasket distortion.
side threaded for Twin Cam heads, and the other Helps heads flow better.
threaded for M-8 models. VT No. 16-2112
VT No. 16-1188
Head Bolt Socket Handle has 3/8" square ends to
hold head bolt socket. Use on Big twins 1936-84 and
Evolution Rocker Box Cover Wrench is designed to reach ³⁄₁₆” allens on Sportster 1957-85. VT No. 16-0124
Evolution Big Twins and Sportster models. Features a ³⁄₈” drive for use with Evo Ratcheting Intake Manifold
torque wrench and a vinyl covered handle. VT No. 16-0220 16-5530 Wrench features ball end allen bit
Spark Plug Socket Set features ³⁄₈” drive to fit 12 and end for flexibility in tight areas.
14mm plugs. VT No. 16-5530
VT No. 16-0202
Swivel Spark Plug Wrench for 16 and 21
mm plugs. 180° rotation.
VT No. 16-1076
16-1076 Evo Rocker Box Cover Ratcheting
16-6529 Wrench features low profile to allow
clearance between frame and engine,
long handle for increases reach and
replaceable bit.
VT No. 16-6529
Standard Spark Plug Wrench 14mm type with
bar handle fits under FL tanks.
VT No. 16-0825
Three Piece Upper and Lower Valve Cover 16-6531
Wrench set fits hex and clip style covers.
VT No. 16-1864
16-6532
Lower Rocker Box Wrench for Evolution and Twin Cam Models is used to
install and remove lower rocker ⁷⁄₁₆” mounting bolts.
VT No. Fits
16-6531 Evolution
16-6532 Twin Cam
1284
Jims Compression
Release Valve Tool
use this tool for
machining all Twin
Cam heads 1999-17 for Head Holder Tool by Pingel has 12 and 14mm ends
®
compression releases. to hold head through spark plug hole, by support in a
Installs on front or rear vise. VT No. 16-1842
head, with or without Exhaust Pipe Retaining
valves installed. Order 16-1884 Ring Tool fits 1984-up
threaded tap tool and FXST, FLT,1986-up FLST,
compression releases separately. XL.
VT No. Item VT No. Brand
16-1169 Compression Release Tool 16-1675 VT
16-1170 Threaded Tapping Tool 16-1884 Jims
16-1171 Compression Release Valve, pair
60-0132 Machine Head and Install Release Valves
Cylinder Head Support
Stand fits Evo, Shovelhead
and Ironhead Sportsters.
Adapters are to be used Clone Speed
with a bar press and the Wrench allows
stand included to push removal of head bolts
guides in and out in a on 1936-84 Overhead
straight line. Set includes Head Bolt Torque Gauge for all Evolutions. This Valve models, after
stand and 6 adapters. gauge allows the measuring of 90° when tightening they are broken loose
VT No. 16-0651 Evolution head bolts. Torquing sequence lasered on with wrench.
Jims Rocker Box gauge. Use on all 1984-98 Evolution models. VT No. 16-0953
VT No. 16-0679
Alignment Tool Set. Fits
1999-17 FXST, FLST, Cast Fin for Repair cut to fit and weld
FLT, FXD in!
VT No. 16-1882 VT No. 11-1710
Jims Exhaust Gasket Installer
Tool will correctly install exhaust
port gaskets into cylinder heads,
Jims M-8 Cylinder Head Holder is two sided, one minimizes gasket distortion.
side threaded for Twin Cam heads, and the other Helps heads flow better.
threaded for M-8 models. VT No. 16-2112
VT No. 16-1188
Head Bolt Socket Handle has 3/8" square ends to
hold head bolt socket. Use on Big twins 1936-84 and
Evolution Rocker Box Cover Wrench is designed to reach ³⁄₁₆” allens on Sportster 1957-85. VT No. 16-0124
Evolution Big Twins and Sportster models. Features a ³⁄₈” drive for use with Evo Ratcheting Intake Manifold
torque wrench and a vinyl covered handle. VT No. 16-0220 16-5530 Wrench features ball end allen bit
Spark Plug Socket Set features ³⁄₈” drive to fit 12 and end for flexibility in tight areas.
14mm plugs. VT No. 16-5530
VT No. 16-0202
Swivel Spark Plug Wrench for 16 and 21
mm plugs. 180° rotation.
VT No. 16-1076
16-1076 Evo Rocker Box Cover Ratcheting
16-6529 Wrench features low profile to allow
clearance between frame and engine,
long handle for increases reach and
replaceable bit.
VT No. 16-6529
Standard Spark Plug Wrench 14mm type with
bar handle fits under FL tanks.
VT No. 16-0825
Three Piece Upper and Lower Valve Cover 16-6531
Wrench set fits hex and clip style covers.
VT No. 16-1864
16-6532
Lower Rocker Box Wrench for Evolution and Twin Cam Models is used to
install and remove lower rocker ⁷⁄₁₆” mounting bolts.
VT No. Fits
16-6531 Evolution
16-6532 Twin Cam
1284
